Software
MiraSpec Design Software Solutions
New, Improved & Expanded MiraSpec Design Solutions Software - Click Here
Our New and Improved MiraSpec software is an analysis tool for engineers to design better and more cost-effective flexible paved and unpaved roadways by incorporating geosynthetics. MiraSpec allows the designer to perform flexible pavement Structural Number (SN) and Equivalent Single Axle Load (ESAL) calculations based on AASHTO (American Association of State Highway and Transportation Officials) 1993 design method and gravel thickness and cost savings comparisons using the Giroud-Han (2004) design method. Both sets of design calculations can be performed either with or without geosynthetics. In addition, designers will be able to calculate thickness reduction savings and "green" savings that the addition of a geosynthetic will provide in the design.
MiraSlope Pro Design Software Solutions
TenCate Geosynthetics introduces TenCate MiraSlope® Pro design solutions software for Mechanically Stabilized Earth (MSE) applications. This easy to use software program of TenCate will assist engineers in determining the reinforcement requirements for reinforced soil slopes.
TenCate MiraSlope® Pro design solutions software is based on state of the practice design methods and allows users to determine the reinforcement configuration for simple geometries, tiered geometries, or fully defined soil profile geometries. The designer or engineer may select the appropriate TenCate reinforcement geosynthetic and facing system to use in their design, and analyze the potential failure modes for the design cross section. TenCate Miraslope Pro uses FHWA design standards.
For new users:
- CLICK HERE to Download the Software
- Download ZIP file from above link
- Install MiraSlope Pro from the downloaded zip file by selecting the Setup.exe application and follow the prompts to obtain a password
- The program password expires every 6 months, on March 1 and September 1 each year. You will have to contact [email protected] to receive a new password each 6 month period.
For registered users:
- The program password expires every 6 months, on March 1 and September 1 each year. You will have to contact [email protected] to receive a new password each 6 month period.
- If you installed MiraSlope Pro prior to September 2023, you will need to download the revised MiraSlope Pro.exe file. This file should be downloaded and replace the existing .exe file within the MiraSlope Pro program file. [Program Files (x86) > ADAMA > MiraSlope-Pro]. The new MiraSlope Pro.exe file, available for download HERE, must replace the existing .exe file for any password requests beginning September 2023 for the program to run.