This integrally formed paving mat combines the excellent reinforcing properties of glass filaments with the liquid asphalt retention capacity of a bonded light weight nonwoven paving fabric.

Key benefits of Mirafi® MPM Paving Mat:

• Crack Reflection Performance: For Low to Medium Severity Cracking
• Equivalent Asphalt Thickness to Achieve the Same Performance: 2-4”
• Traffic Improvement: Increase traffic capacity for curb constrained pavements (MPM50 only)
• Cost Effectiveness: Much less expensive than thicker asphalt layers required to perform the same function. Suitable for full width overlay, local patching and joint repair.
• Moisture Barrier: Prevents water from penetrating into the road sub structure.
• Rehealing: High re-bonding potential due to the higher tack coat application rate than similar products
• Adhesive Bonding: Provides uniform bonding between old and new asphalt layers, so resists delamination where moving asphalt mixes are used.
• Installation: Easy to install on both milled surfaces, and on roads with curves.
• Milling and Recycling: Can be milled with conventional milling machines, and if saturated during installation is also recyclable.
• Chemical Resistance: Chemically resistant to road salt, or other chemical deicing agents.